Rubber Grinding Mill for Rubber Processing and Recycling

Application of Rubber Mill Machine

1. Generally, reclaimed rubber factories directly purchase a large amount of rubber powder, because rubber powder is the main raw material of reclaimed rubber.

2. Waterproof building materials industry: for making waterproof materials such as rubber asphalt membrane, waterproof ointment, etc.

3. Expressway: In the past, asphalt was used only, but now high-grade road surface needs to be mixed with rubber powder, which not only reduces the cost, but also improves the service life.

4. Stadium runways, airstrips, and golf courses are all made of waste rubber powder.

5. Pulverized rubber powder: If the waste rubber powder is processed into 60 mesh-80 mesh, it can be directly used as activated rubber powder. It can also be directly used as rubber products, so that the reclaimed rubber process can reduce a lot of processes. 

6. Color composite rubber floor tiles, anti-static floor tiles, use granular waste rubber powder to make color composite floor tiles and anti-static floors with unique technology, suitable for swimming pools, kitchens, bathrooms and computer control center rooms, used in waterproof or  anti-static occasions.

Full-automatic-Waste-Tyre-Recycling-Line (4)

Maintenance Tips for Rubber Grinding Mill

1. The shaft of the rubber mill bears the full load of the machine, so good lubrication has a great effect on the life of the bearing which directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good.

2. The newly installed wheel rim are prone to loosening and must be checked frequently.

3. Pay attention to whether the work of each part of the machine is normal.

4. Regularly check the wear degree of the wear-resistant parts, and get ready to replace the worn parts at any time.

5. Dust and other objects on the plane for movable device should be removed, so the movable bearing can move on the bottom frame when the machine is fed materials that cannot be broken.

6. If the oil temperature of the bearing rises, stop the machine immediately to check the cause and eliminate it.

7. If there is an impact sound when the rotating gear is running, stop it immediately for inspection.


Factors Affecting the Output of Rubber Pulverizer

1. The feeding speed: the raw rubber material should not be fed too fast, otherwise it will be easy to get stuck, and they should be fed in evenly.

2. The blades should be ground regularly: the blades of the rubber grinder that have been used for a long time are obviously not sharp enough, and regular grinding is required, otherwise the output will be greatly reduced.

Production Process of Rubber Powder

Firstly, cut the rubber ring from the tire with a tire drawing machine; then, cut the tires into blocks by tire cutter, and then feed rubber blocks into a tire shredder, and then, grind them into particles about 10-15 mm and send them to a rubber mill by a conveyor, finally, grinding mill grinds rubber particles into rubber powder, and the rubber powder will be screened by vibrating screen.

The waste rubber grinding and recycling plant is composed of rubber shredder, pulverizer, vibrating screen and feeding belt. It can process and crush all kinds of rubber (such as bicycles tires, motorcycles tires, tractors tires, automobile tires, scraps from rubber factories, conveyor belts, etc.). Yuxi tire grinding mill can effectively control the grinding temperature, to ensure the quality of rubber powder. The finished fineness of rubber powder can reach 50-60 mesh. 

rubber grinding mill

For more details and price list, please leave message on our website, thank you so much.

Get a Free Quote Now!

We guarantee 100% privacy, your information will not be shared.



Whatsapp:0086 13674998188



Send Inquiry×

The price will be sent soon via email.