Tire Wire Drawing Machine

1. Hydraulic waste tire wire drawing machine is used to completely pull out the large strands of steel wire on both sides of the tire at one time, and smoothly separates the steel wire and rubber, and its purpose is to facilitate the subsequent crushing or cutting process.

2. Yuxi tyre steel wire drawing machine is composed of motor, hydraulic system, pull hook, cross plate, body, control handle, guide wheel, etc., which is mainly suitable for recycling of waste tires in waste tire recycling line.

3. Double hooks are designed for wire drawing, which has high separation efficiency and reduces labor intensity of workers.

PHOTO

Tire Wire Drawing Machine

Introduction to Hydraulic Tire Drawing Machine

Hydraulic tire wire drawing machine is used to completely pull out the large strands of steel wire on both sides of the tire at one time, and smoothly separates the steel wire and rubber, and its purpose is to facilitate the subsequent crushing or cutting process. Yuxi tyre steel wire drawing machine is composed of motor, hydraulic system, pull hook, cross plate, body, control handle, guide wheel, etc., which is mainly suitable for recycling of used tires or scrap tires in waste tire recycling line.

Hydraulic-tire-wire-drawing-machine (2)

Working Principle of Tyre Wire Drawing Machine

The motor drives the hydraulic system and the oil cylinder of the double hooks tire steel wire drawing machine, and the draw hook is connected to the draw rod of the oil cylinder. Due to the movement of the oil pump and the oil cylinder, the draw hook is reciprocated. Place the tire on the feeding mouth, extend the pull hook out of the feeding mouth, hook the inner steel part of tire ring, and then start the button. Due to the strong pulling force of the oil cylinder, the steel wire will be pulled out as a whole, and the sidewall part is caused to tear the rubber due to the action of the pulling force, thereby achieving the purpose of separating the steel wire from the tire.

Hydraulic-tire-wire-drawing-machine (3)

Advantages of Tire Steel Wire Drawing Machine

1. Yuxi hydraulic tyre wire drawing machine has a compact structure and a small footprint, which is convenient for transportation and installation.

2. Double hooks are designed for wire drawing, which has high separation efficiency and reduces labor intensity of workers.

3. Main components of Yuxi single hook tyre wire drawing machine are made of wear-resistant materials, with high strength, wear resistance and long service life.

4. Yuxi tire steel wire drawing machine is equipped with a tire lifting device, so that different tires can be easily placed, reducing labor and higher output.

5. The hydraulic system of our hydraulic tire drawing machine adopts advanced constant power variable plunger pump technology with low noise and high pressure, which improves service life of the equipment and safe operation of the control system.

Hydraulic-tire-wire-drawing-machine (4)

Double Hooks Tyre Wire Drawing Machine

Double hook tire wire drawing machine

Technical Parameter of Tire Steel Drawing Machine

Type YX 400 YX 450 YX 500 YX 560 YX 600 YX 750
No. of drafts to 13 to 13 to 13 to 13 to 10 to 9
Material High and low carbon steel
Inlet strength (Mpa) ≤ 1350
Inlet diameter (mm) 3.6 4.5° 6.5 6.5 8 8
Outlet diameter (mm) 0.8 1 1 1.5 1.8 3
Passe reduction (%) 18--25 18--25 18--25 18--25 18--25 18--22
Hardness of block HRC 58--62
Motor power (kw) 15--22 15--22 18.5--30 22--37 30--45 45
Production speed(m/s) 18 16 15 15 14 7
Noise (dB) ≤85


Get a Free Quote Now!








We guarantee 100% privacy, your information will not be shared.

Tel:0086-0371-53762053

Tel:0086-13674998188

Whatsapp:0086 13674998188

Wechat:8613674998188

Skype:yuxi.zhengzhou

Send Inquiry×

The price will be sent soon via email.